Car restoration is one activity that will leave you with a high sense of accomplishment. It is an activity that demands persistence, dedication and money!to say nothing about time. Fords and Chevy's are the two models that are the easiest to begin with as parts are more readily available.

Prior to any car restoration you will need to organize your shop for the task at hand. Collect the supplies needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off sooner rather than later. When it is time to take the car apart you need to estimate what needs to be replaced and what needs to be repaired. With this type of organization you will make sure you are not wasting parts during the car restoration process.

Take inventory of the parts as you pull them off by dividing them into two separate boxes labeled repair and replace. Take pictures of them as you do this so you know what the car will look like, before and after. This method will also help you in figuring how much the cost will be and how long it will take you to finish the car restoration.

After you have your parts removed you can begin the cleaning process. The cleaning process of the car restoration requires the car be stripped down to bare metal. This can be done through several methods although you will need to find one that you feel the most comfortable with. The easiest and fastest method is to have the car dipped in acid. This removes dust, rust, and other foreign materials.

Now you will see the damage to the car once it's stripped. You very well might find rust holes, damaged floorboards, and dents. But do not despair! Even if the car didn't look bad when you purchased it you need to that this car has had a full eventful life. You only want to add to it right? So get busy and take that Sharpie to mark all the things that either require replacing or repairing.

It is time to fix all those dents, holes, and problem areas to get set for sanding. You will use several grades of sandpaper throughout the sanding process starting with 36 to 80. Once you have finished this step you are now ready to apply the glazing. Begin with 220 wet grit sandpaper and advance to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also offer a preventative measure against scratches.

Your car restoration is complete! You are now ready to show off your beautiful car to the neighborhood with well earned pride.

For All The Essential Information On Car Restoration go to: Car Restoration